ECN 223 F Fanuc Absolute angle encoder with mounted stator coupling Hollow through shaft

   

AMI HOME  |  HEIDENHAIN AWARDS  REPAIRS & SERVICE CALLS  |  ABOUT US  |  CONTACT US AMI LINE CARD

 


ECN 223 F Fanuc Absolute angle encoder with mounted stator coupling.
 Hollow through shaft
 


ECN 223 F Manual  - Download PDF Here
ECN 223F Product Catalog  - Download PDF Here


Specifications for the ECN
223F

Measuring procedures Absolute
Shaft coupling Mounted stator coupling
Absolute position values Serial Interface Fanuc 02
Order designation Fanuc 02
Positions per rev 8 388 608 (23 bits)
Elec. permissible speed 3000 min-1
Recommended measuring step 0,000 04° (ca. 0,15'')
System accuracy ± 10''
Power supply 3.6 V to 5.25 V max. 200 mA (without load)
Electrical connection Cable
Electrical connection 1 m, with M23 coupling
Max. cable length 30 m
Shaft Hollow through shaft
Shaft diameter 20 mm
Mech. permissible speed n ≤ 3000 min-1
Starting torque (at 20°C) ≤ 0,1 Nm
Moment of inertia of the rotor 138 x 10-6 kgm²
Natural frequency ≥ 1000 Hz
Permissible axial motion
of measured shaft
± 0.1 mm
Vibration 55 to 2000 Hz ≤ 100 m/s² (IEC 60068-2-6)
Shock (6 ms) ≤ 1000 m/s² (EN 60068-2-27)
Max. operating temperature 70 °C
Min. operating temperature For frequent flexing: -10 °C
Rigid configuration: -20 °C
Protection IEC 60529 IP 64
Weight 0.8 kg

 

           
                                 

Name:     
Company:
    
Address:
    
City:
    
State:
    
Zip:
    
Work #:
    
E-mail:
    

Comments                                                      
     

Product:     
Model #:
    

                               

 
 

|Linear Scales| 

|What AMI Can Do for You|

Call Toll Free: 1-888-354-2525 

© 1987 - 2009 Automation and Metrology, Inc.  All rights reserved.