ECN 223 Mitsubishi High Speed Serial Interface Absolute angle encoder with mounted stator coupling and Hollow through shaft

   

AMI HOME  |  HEIDENHAIN AWARDS  |  REPAIRS & SERVICE CALLS  |  ABOUT US  |  CONTACT US |  AMI LINE CARD

 


ECN 223 Mitsubishi High Speed Serial Interface Absolute angle encoder with
mounted stator coupling and Hollow through shaft
 

HEIDENHAIN ECN 223M ECN 223 Mitsubishi High Speed Serial Interface Absolute angle encoder with


ECN 223 M Manual  - Download PDF Here
ECN 223M Product Catalog  - Download PDF Here

 Specifications for the ECN 223M

Measuring procedures Absolute
Shaft coupling Mounted stator coupling
Absolute position values Mitsubishi High Speed Serial Interface
Order designation Mitsu 02-04
Positions per rev 8 388 608 (23 bits)
Elec. permissible speed 3000 min-1
Recommended measuring step 0,000 04° (ca. 0,15'')
System accuracy ± 10''
Power supply 3.6 V to 5.25 V max. 200 mA (without load)
Electrical connection Cable
Electrical connection 1 m, with M23 coupling
Max. cable length 30 m
Shaft Hollow through shaft
Shaft diameter 20 mm
Mech. permissible speed n ≤ 3000 min-1
Starting torque (at 20°C) ≤ 0,1 Nm
Moment of inertia of the rotor 138 x 10-6 kgm²
Natural frequency ≥ 1000 Hz
Permissible axial motion
of measured shaft 		± 0.1 mm
Vibration 55 to 2000 Hz ≤ 100 m/s² (IEC 60068-2-6)
Shock (6 ms) ≤ 1000 m/s² (EN 60068-2-27)
Max. operating temperature 70 °C
Min. operating temperature For frequent flexing: -10 °C
Rigid configuration: -20 °C
Protection IEC 60529 IP 64
Weight 0.8 kg

 

           
                                 

Name:     
Company:     
Address:     
City:     
State:     
Zip:     
Work #:     
E-mail:     

Comments                                                      
     

Product:     
Model #:     

                               

 
 

|Linear Scales| 

|What AMI Can Do for You|

Call Toll Free: 1-888-354-2525 

© 1987 - 2009 Automation and Metrology, Inc.  All rights reserved.