{"product_id":"heidenhain-vt-122-tool-inspection-and-measurement-camera-system","title":"HEIDENHAIN VT 122 Tool Inspection and Measurement Camera System","description":"\u003cp\u003eThe HEIDENHAIN VT 122 is a camera system for tool inspection and non-contact tool measurement inside a machine tool's work envelope. Two cameras image tools from the side and from below. An additional measuring LED on Camera 1 enables tool-length and tool-diameter measurement with the appropriate software and machine integration, while the tool remains clamped in the spindle.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VT 122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID number:\u003c\/strong\u003e 1373589-xx\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCameras:\u003c\/strong\u003e two 1.3-megapixel monochrome cameras\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e ring light and lateral LED on each camera, adjustable through software; additional measuring LED on Camera 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImage size:\u003c\/strong\u003e 8 mm × 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating distance:\u003c\/strong\u003e 52 mm for Camera 1; 20.5 mm for Camera 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 19.2 V to 30 V, EN 61131-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower connection:\u003c\/strong\u003e 12-pin A-coded M12 flange socket, male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera interface:\u003c\/strong\u003e Gigabit Ethernet, CAT 6 or later\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera connection:\u003c\/strong\u003e 8-pin X-coded M12 flange socket, female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cable length:\u003c\/strong\u003e 25 m with the specified cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection placement:\u003c\/strong\u003e on the rear or through the base plate, depending on the variant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e IP66\/IP68 when connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMass:\u003c\/strong\u003e approximately 1.00 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e 0 °C to 45 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e fixing clamps or four M6 screws on a 92 mm × 50 mm pattern, depending on the variant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning:\u003c\/strong\u003e 8 mm compressed-air inlet for pulse cleaning of the tool and cover lenses; two 6 mm inlets are optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInspection and machine integration\u003c\/h2\u003e\n\u003cp\u003eThe camera system operates with Visual Tool Check software and the appropriate machine-control cycles. Standard software functions include tool images from the side and below, close-up images of each flute, manual wear measurement and breakage control. Panoramic imaging and automated flank-wear measurement are options, not standard hardware features.\u003c\/p\u003e\n\u003cp\u003eVT 122 supports visual inspection plus tool-length and tool-diameter measurement. Choose rear connections or base-plate connections for the machine's available mounting space. Software, control compatibility, mounting space, compressed air and installation requirements must be confirmed for the machine. This page covers the VT 122 camera hardware; it does not imply that software or control options are included.\u003c\/p\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.auto-met.com\/39-HEIDENHAIN-VT121-VT122.pdf\" target=\"_blank\" rel=\"noopener\"\u003eVT 121 and VT 122 product information, September 2025 (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eMachine down? Ask about expedited repair or replacement options. Include the camera ID and machine details so we can identify the correct replacement.\u003c\/p\u003e","brand":"HEIDENHAIN","offers":[{"title":"Default Title","offer_id":67661693157693,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/8222\/4189\/files\/41-HEIDENHAIN-VT122-white_4799aef6-7344-4a17-a9df-55708dc30728.png?v=1791605436","url":"https:\/\/auto-met.com\/products\/heidenhain-vt-122-tool-inspection-and-measurement-camera-system","provider":"Automation and Metrology, Inc.","version":"1.0","type":"link"}