MASTER-SINE SINE PLATES
FORMERLY BY EX-CELL-0 / ROBBINS

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

  • Master-Sine sine plates provide a sturdy and accurate way to grind or measure angles.
     

  • Hardened steel top plate has tapped holes for use with clamping devices.
     

  • The roll bar is made from hardened steel, ground and lapped for straightness and roundness.
     

  • Swivel block provides full face contact with gage blocks, keeping them securely in place.
     

  • Exclusive locking device inside the hinge roll provides a positive lock with an expanding action. Both screws lock toward the front of the unit, pulling the top plate down on the set-up gage blocks without distortion. Hinge is made from hardened steel, ground and lapped.
     

  • Angular accuracy of set-ups is guaranteed to be within 5 seconds of arc up to 15°, 10 seconds up to 30° and 15 seconds up to 45°.
     

  • Side and back rail included.

B-3-SP MasterSine Sine Plate

B-3-SP
 
B-5-SP MasterSine Sine Plate

B-5-SP


B-10-SP
MODEL # L W H C SQUARE &
PARALLEL
WT(#)
B-3-SP 4" 4" 2" 3" ±0.0001" 0.0002" 7
B-5-SP 6-1/2" 6-1/2" 2-1/2" 5" ±0.0001" 21
B-10-SP 7-3/4" 12" 3" 10" ±0.0001" 0.0003" 52
B-15-SP 6-3/4" 18-1/4" 3-3/4" 15" ±0.00015" 0.0004" 97


 

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Automation and Metrology 130 Liberty Street Painesville, Ohio 44077
Phone:  (440) 354 6436  Fax:  (440) 639 9983
E-mail: sales@auto-met.com

Back