PRECISION VISES

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

 

V-612 Precision Vise
V-612

 

V-237-S1 Precision Vise on SPC-66-S1 Compound Sine Plate
V-237-S1 on SPC-66-S1

 

Precision Vise Drawing

 

  • High precision, solid one-piece steel construction with body and jaws hardened to Rc 58-62.
     

  • Angled center channel provides extra jaw capacity.
     

  • Movable jaw pulls into base at 45 to 60 to insure maximum holding power and hold down force, eliminating tilting and lifting.
     

  • V-237 models have a ratchet mechanism with notched pockets and one-piece drawbar.
     

  • Jaw can be opened and closed without unbolting vise from work surface.
     

  • End pockets for convenient clamping on V-237 models and larger.
     

  • V-237 models and smaller have horizontal and vertical vees in the movable jaw. In addition, the "J" models have vees in the tops of the jaws and 1/8" x 1/8" steps at the top inside face of the jaws.

 

MODEL # SineSet
SERIES
L W H J JAW
CAPACITY
SQUARE &
PARALLEL
WT (#)
SineSet COMPATIBLE
V-225-S0 S0 5-7/8" 2" 2" 1" 3-1/4" 0.0002" 6
V-237-J-S1 S1 7-1/2" 3" 2-5/8" 1-5/16" 5" 12
V-237-S1 4-3/4" 11
V-411-S2 S2 11" 4" 3" 1-7/16" 7" 0.0003" 20
V-612-S2 12" 6" 3-7/16" 1-11/16" 8" 40
 NOT SineSet COMPATIBLE
V-225 -- 5-7/8" 2" 2" 1" 3-1/4" 0.0002" 6
V-237 7-1/2" 3" 2-5/8" 1-5/16" 4-3/4" 11
V-237-J 5" 12
V-411 11" 4" 3" 1-7/16" 7" 0.0003" 20
V-612 12" 6" 3-7/16" 1-11/16" 8" 40

 




 

Automation and Metrology 130 Liberty Street Painesville, Ohio 44077
Phone:  (440) 354 6436  Fax:  (440) 639 9983
E-mail: sales@auto-met.com

Back


SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE