•DIAMOND COMPOUNDS are the result of many years of research and testing to develop a superior diamond abrasive lapping paste. Pure diamond is the only abrasive in our compound (no fillers or undersized particles to fool you). The diamond powders used are critically graded to exceed the specification of the U.S. standards CWS261-63. The base has high lubricity, acts as a detergent in polishing and does not dry out or ball under lapping pressures. If you want an efficient, tested, and functioning base, by all means try our compound. •LAPPING HEADS are carried in stock for immediate delivery and are specifically designed for lapping and reaming carbide or steel dies. Quality made from tool steel and heat treated. All component parts have been precision ground and hand fitted to provide years of service. •STICK LAPS are precision ground to close tolerances for use in carbide or steel dies where diamond lapping compounds are used. straighter and rounder holes can be had through the use of stick laps. Special hole configurations (such as angles) are more easily and precisely produced through the use of stick laps. Roundness and taper within .0002” / 0,005mm. •HY-PRESS LUBE lubricant is especially formulated for the assembly of the steel or carbides inserts into the die casings. Also for hobbing applications where extreme pressure is required. Its develops a very high film strength that resists breaking down under extreme pressure. Dies will assemble and disassemble with ease. Metal will flow without tearing during extrusion/hobbing processes. This product has proven itself with years of success. •CARBIDE REAMERS are stock in 4”, 6” and 9” lengths for long, deep hole depths and provide the ultimate carbide cutting proformance. Stock in simi and finished sizes, our carbide reamers are shipped within 24hrs. We provide sharper cutting angles that produce 15% to 20% more removal with less work. HEADER PUNCHES FORMING TOOLS PINS & PUNCHES KNOCK-OUT PINS CUT-OFF KNIVES DIE ACCESSORIES