|
|
Digimatic Calipers w/Absolute Encoders -
Series 500 -
without SPC output
FEATURES:
Introducing the new Digimatic MyCal E-Z
Caliper featuring ABSOLUTE LINEAR
ENCODER technology. It has achieved
superior cost performance and ease of
use by featuring only essential
functions
Features
The Absolute MyCal E-Z allows direct
measurements from power on.You can
forget the time consuming origin setup
which otherwise is required each time
the power is turned on.
Zero-setting of the display is also
possible at any slider position for easy
comparison measurements (incremental
mode).
Large .295" high LCD digits (.365"
high LCD digits for 12" Model) allow
measurement results to be at aglance.
A scale contamination detection
function is implemented to detect
contamination of surface and display the
error message (ErrC) on the LCD. The
correct value is only displayed if the
contamination is removed
The battery life has been greatly
extended with the power-conserving
design permitting 3.5 years (20,000
hours) continuous operation with a
single battery
Specifications
Quantizing Error: ± 1 count
Function: ORIGIN Setting, ZERO/ABS,
ON/OFF, Inch/Metric
Response Speed: Unlimited
Battery: Silver oxide cell SR-44 (1 pc.)
Part No. 541980
Battery Life: Approx. 20,000 hrs.
(continuous operation)
|
|
|
|
|
|
|
|
|