Mitutoyo Corporation - Anvil Attachments for micrometers
Mitutoyo Corp, Mitutoyo Corporation, Mitutoyo Handtools, Mitutoyo USA 

    

          
  About Us -   AMI Home Page    
 
Our Mitutoyo Main Page

 
Anvil Attachments - For Outside Micrometers
 

FEATURES:


To measure odd workpieces, several convenient anvil attachments are prepared by MITUTOYO. Among them the most often used one is the ball attachment.


The ball attachments are hardened steel balls with .200" and .250" diameters which are placed on the .250" and .315" diameter anvils, respectively, by rubber caps. With these attachments, regular micrometers can measure cylindrical wall thickness, but, .200" or .250" must be subtracted from the readings.


Other attachments shown here are .500" in length. The added amount must be subtracted from the reading
Fit .315" Dia. Anvils and Spindles

 

Back To The Micrcometer Selection Page



Visit the Mitutoyo Knowledge Database

 

This information is the made available by the Mitutoyo Corporation
 

 

 
Mitutoyo Caliper Sale