| |
|
Standard
Type Probes (spring push with carbide tip)
DG10BP/BS, DG25BP/BS, DG50BP, DG100BP
- Employs precision Magnescale® linear encoder technology
- Axial and radial cable exit models
- 10, 25, 50, and 100mm strokes
- High shock and vibration resistance
- Linear over the entire stroke, not just the null point
- Dust proof and water resistant seals to protect linear bearings
- 0.5µm A/B open collector output
|
| |
|
Long
Travel Standard Type Probes (no spring push with magnetic tip)
DG155BP, DG205BP
- Employs precision Magnescale® linear encoder technology
- 155 and 205mm strokes
- High shock and vibration resistance
- Linear over the entire stroke, not just the null point
- Dust proof and water resistant seals to protect linear bearings
- 0.5µm A/B open collector output
|
| |
|
Light
Touch Probes (spring push with carbide tip)
DG10BN, DG25BN/BL, DG50BN, DG100BN
- Employs precision Magnescale® linear encoder technology
- Axial and radial cable exit models
- 10, 25, 50, and 100mm strokes
- 20mm mounting diameter
- About 5 times lower measuring force than standard type probes
- Designed to gauge delicate surfaces like auto windshields, CRTs,
electronic components, etc.
- Linear over the entire stroke, not just the null point
- 0.5µm A/B open collector output
|
| |
|
Light
Touch Miniature Design Probes (spring push with carbide tip)
DG805BL/FL, DG810B/BL, DG810F/FL
- Employs precision Magnescale® linear encoder technology
- Radial cable exit models accept a vacuum line for spindle lift
- 5.2 and 10mm strokes
- 8mm mounting diameter (special flange mounting optional)
- About 5 times lower measuring force than standard type probes
- Designed to gauge delicate surfaces like auto windshields, CRTs,
electronic components, etc.
- Linear over the entire stroke, not just the null point
- Dust proof bellows
- 0.5µm A/B open collector output
|
| |
|
Special
Counter Balance Design (no spring push)
DG110B
- Employs precision Magnescale® linear encoder technology
- 110mm stroke with smooth spindle movement
- Designed to gauge extremely delicate surfaces with optional
counter balance system (DZ-581)
- Braking mechanism reduces spindle return speed preventing
work-piece damage
- Dual linear bearing design, minimizes spindle tip deflection
- Linear over the entire stroke, not just the null point
- 0.5µm A/B open collector output
|
| |
 |
LT20
Series Digital Display
- Accepts Sony DG or DL Series digital probes
- 1 or 2 digital probe input models
- 2 channel models display A,B or A+B, A-B, B-A
- Selectable display resolutions with choice of inch/mm
- Standard DIN size (72mm x 72mm)
- Comparator upper and lower limit settings with go/no go open
collector output
- One key reset and preset selection
- Current value, maximum, minimum, and peak-to-peak mode selection
- RS232 or BCD I/O models available
|
|
)
)
)
)
