|
| |
MT20 / MT32 / MT50
|
Flexible Magnetic Scale
|
 |
For
use with Hymark Series SME-2 and
SME-5 or any other available Magnetic Encoder |
|
Specifications
Series MT
|
| Pole pitch |
MT20 = 2.mm
MT32 = 3.2mm
MT50 = 5.0mm |
| Width |
10mm |
| Thickness |
1,3mm |
| Length |
Up to 2.5/10/50m
(8.2/32.8/164ft.) |
| Accuracy
Class at +20°C (68°F) |
3 = ± 0.03mm/m, up to
2.5m
4 = ± 0.04mm/m, up to 10m
8 = ± 0.08mm/m, up to 50m |
| Protection |
IP 67 |
| Operating Temperature |
-10°C to 65°C (14°F
to 149°F) |
| Storage Temperature |
-20°C to 65°C (-4°F
to 149°F) |
| Steel Expansion
Coefficient |
a
= (11 ± 1) x 10-6/K |
| Bond
Strength |
F > 25Ncm Steel back
strip to magnetic ferrite material (bend radius = 10mm) |
| Chemical
Resistance |
Isooctane, Glycerin,
Isopropyl Alcohol, Methyl Alcohol, Mineral oil, Formic Acid,
Formaldehyde, N-Hexane |
| Accessories |
Stainless steel cover
strip ,Double sided adhesive tape |
| Mounting
Instructions |
| Ideal application temperature range
is +20°C to +35°C (68°F to 95°F), below +10°C (50°F) is not
recommended. Ultimate bond strength approaches after 72 hours at
+20°C (68°F). Tapes will adhere to most clean, dry and smooth
surfaces. Firm application pressure develops better adhesive
contact and thus improves bond strength. |
|
 |
|
