Mitutoyo - Miscellaneous


Pocket Magnifiers - Series 183, Clear Loupe - Series 183	S-2
Pocket Comparators/Magnifiers w/Reticles Series 183	S-2
Digital Protractor - Series 950	S-3
Precision Levels - Series 960, Levels - Spirit Levels - Series 980	S-4
Digimatic Universal Protractor	S-5
Universal Bevel Protractor - Series 187, Protractor - Series 187	S-6
Measuring Tapes - Series 980, Frame Winder - Series 980	S-7
Digital Tape Measure - Series 216	S-8
Radius Gages - Series 186, Protractor - Series 968	S-9
Radius Gages - Series 186 - Decimal and Fractional	S-10
Angle Gages - Series 186	S-11
Depth Gage, Adjustable Angle - Series 950	S-12
Pitch Gages - Series 188, 950	S-12
Thickness Gages - Series 184, 950, Center Gage - Series 950	S-13
Standard Gages - Series 950, Tap & Drill Gage - Series 950	S-14
Drill Point Gage, Thread Gage	S-14
Knife Edge Straight Edge - Series 528, Steel Squares - Series 916	S-15
Combination Square Sets - Series 180	S-16
Steel Rules - Series 182	S-17, 18
Semi-Flexible Rules - Series 182, Hook Rules - Series 182	S-19
Pocket Steel Rule - Series 950	S-19
Demagnetizers - Series 986, Precision Sine Vises - Series 986	S-20
Precision Vises - Series 986, Precision Hydraulic Vise	S-21
Precision Sine Plates, Precision Magnetic Sine Plates - Series 986	S-22
Precision Two and Three Dimensional Vises - Series 986	S-23
Magnetic V-Block, Magnetic Adjustable Links - Series 986	S-24
V-Blocks and Clamps - Series 181	S-24
Magnetic Hexagonal Holder - Series 986	S-25
Magnetic Cubic Blocks - Series 986, Magnetic Holder - Series 986	S-25
Permanent Magnetic Chucks - Series 986	S-26, 27
Spring Div., Outside Spring Calipers, Inside Spring Calipers - Series 950	S-28
Small Hole Gages - Series 154	S-28
Telescoping Gages - Series 155	S-29
Tap Wrench (T-Handle), Parallel Clamps	S-29
Scribers, Center Punches, Drive Pin Punches - Series 985	S-30
Edge & Center Finders, Surface Gage - Series 156	S-31
Magnetic Lamps - Series 986, Zero-It, Zero-Setter - Series 950	S-32
Angle Blocks - Series 981, Adjustable Parallels - Series 985	S-33
MU-Gage Plus, MU-Gage - Series 179	S-34, 35
Roll Calipers - Series 310, Digi-Derm - Series 179	S-36
Bench Comparator - Series 162, Bench Centers - Series 967	S-37
Digital Hand Tachometers - Series 982	S-38
Datatorq - Series 983 - Digital Torque Wrenches w/SPC output	S-39
Miscellaneous Mitutoyo Products and Accessories	S-40