HEIDENHAIN TD 110 Tool Breakage Detector
The HEIDENHAIN TD 110 is a non-contact inductive tool breakage detector for HSS and carbide tools. It checks tools as they pass the sensor while rotating, including microtools down to 0.4 mm diameter. Request a quote with the detector ID, machine, control and mounting details.
Technical Data
- Detection method: inductive, non-contact
- Minimum tool diameter: 0.4 mm, with a minimum tooth length of 2 mm
- Detectable breakage: at least 2 mm missing
- Tool rotation during inspection: operating speed or at least 1000 rpm
- Mounting: mounting holes
- Electrical connection: 8-pin M12 flange socket
- Supply voltage: 10 V to 30 V
- Output signals: HTL switching signal and its inverse; floating switch outputs NC and NO
- Cable length: ≤ 30 m
- Vibration, 55 Hz to 2000 Hz: ≤ 200 m/s², EN 60068-2-6
- Shock, 6 ms: ≤ 300 m/s², EN 60068-2-27
- Operating temperature: 10 °C to 50 °C
- Storage temperature: -20 °C to 70 °C
- Protection: IP66/68 when connected
- Mass: approximately 0.24 kg
Installation and configuration
Position the detector in the work envelope where tools can pass it during a tool change. An LED indicates tool detection. The detector does not require a teach-in process or compressed air. Match the sensor position, tool path, cable and control input before selecting a replacement or retrofit.
Documents
Touch probes catalog (PDF; TD 110 dimensions and specifications on pages 30-31)
Machine down? Ask about expedited repair or replacement options. Include the detector ID, machine model and connection details so we can help identify the correct configuration.